LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2016 >> Q3 Premium Plus >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Air Conditioning >> 87 Air Conditioning >> Display Control Head >> Display Control Head, Removing And Installing >> Display And Control Head, Removing And Installing, Climatronic Control Module -J255- >> Notes
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Display And Control Head, Removing And Installing, Climatronic Control Module -J255-: Notes

Special tools and workshop equipment required 

NOTE:

Only on vehicles with an automatic climate control system

There are different versions (recognizable, for example, by the button label A/C  instead of AC  ). Pay attention to the correct allocation. Refer to the Parts Information.

An OFF  button exists on the Climatronic Control Module -J255- A/C control heads with the part number starting from the index "D". For these Climatronic Control Modules -J255-, the function of the recirculation  and A-recirculation  buttons are combined in one button. The button labeling for switching the activation of the A/C compressor on and off is A/C  instead of AC  .

For Climatronic Control Module -J255- A/C control heads with the part number from the index "F" (running change in MY 2014), the labeling of the buttons, trim and trim surface were changed (for example, the labeling on the defrost button was switched from Front  to MAX  ). Pay attention to the correct version and allocation. Refer to the Parts Information.

-- If the Climatronic Control Module -J255- control head is being replaced, select "Replace Control Module" on the Vehicle Diagnostic Tester in the "Guided Fault Finding" or "Guided Functions" function.