Left/Right Front Level Control System Sensor -G78- /:G289, Removing And Installing: Installing
Install in reverse order of removal. Note the following:
The level control system sensor lever must point toward vehicle exterior.
The thread on the vehicle level sensor must be installed into the front hole in the control arm. The tab on the vehicle level sensor bracket must lock into the rear hole in order to assure the correct installation position.
-- On vehicles with electronically damping, perform the function "Adapt the control position". Refer to Vehicle Diagnostic Tester.
-- If the control position was reprogrammed and if the vehicle has lane assist, then it will then be necessary to calibrate the driver assistance systems front camera. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .
-- For vehicles with a level control system sensor, perform a headlamp basic setting. Refer to OVERVIEW - HEADLAMP .