LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2016 >> RS 7 Base >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System (Service Information 2 Of 2) >> Air Conditioning >> Display And Control Head >> Display And Control Head, Removing And Installing >> Rear A/C Display Control Head -E265-, REMOVING AND INSTALLING >> Installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Rear A/C Display Control Head -E265-, REMOVING AND INSTALLING: Installing

Installation is done is reverse order, observe the following:

-- Note the exact allocation when replacing the Rear A/C Display Control Head -E265-.

Always perform the following work after replacing/installing the Rear A/C Display Control Head -E265-. Use the Vehicle Diagnostic Tester in "Guided Fault Finding"  function.

-- Perform and/or check the coding.

-- Perform the basic setting.

-- Read the Diagnostic Trouble Code (DTC) memory (and clear the input for the currently displayed entry).

-- Check the adaptation.

-- If necessary, perform the output diagnostic test.