Front Treble Speakers -R20- / -V344- / -R22- / -V345-, Removing And Installing, Bang & OLUFSEN: Removing
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the side speaker trim. Refer to SPEAKER TRIM, REMOVING AND INSTALLING .
-- Remove the bolts -1- on the Left Front Treble Speaker -R20- -2- and then remove the Left Front Treble Speaker -R20- -2- upward from the centering pins -3-.
-- Release and disconnect the connectors from the Left Front Treble Speaker -R20- -2-.