Chip Card Reader Control Module, Removing And Installing: Removing

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

-- Turn off the ignition and all electrical consumers and remove the ignition key.

-- Open the glove compartment.

-- Remove the chip card.

-- Slide the Chip Card Reader Control Module -J676- -1- back until it can be removed from the trim.

Fig 1: Identifying Chip Card Reader Control Module

Courtesy of AUDI OF AMERICA, LLC

-- Remove the clip -4-.

-- Release and disconnect the connectors -3- from the Chip Card Reader Control Module -J676- -1-.