Chip Card Reader Control Module -J676- CONNECTOR ASSIGNMENT, THROUGH MY 2014

WARNING: This page is about a different car, the 2015 Audi A7 Quattro and 2014 Audi A7 Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Chip Card Reader Control Module -J676-

NOTE:

Unlisted connector terminals are not assigned.

Fig 1: 32-Pin Connector -T32p-

Courtesy of AUDI OF AMERICA, LLC

1-16 - to the Traffic Data Antenna -R173-

17 - VICS data wire to the Information Electronics Control Module 1 -J794-

19 - VICS data wire to the Information Electronics Control Module 1 -J794-

21 - Switch-on signal to the Information Electronics Control Module 1 -J794-

22 - Terminal 30

23 - ETC data to the Information Electronics Control Module 1 -J794-

25 - ETC data from the Information Electronics Control Module 1 -J794-

28 - Terminal 31