Digital Sound System Control Module 2 - J787-, REMOVING AND INSTALLING, BANG & OLUFSEN, THROUGH MY 2014
The Digital Sound System Control Module 2 - J787- - 1- is located behind the left luggage compartment trim panel and under the Digital Sound System Control Module - J525-.
If replacing the control module, select the " Replace Control Module" function on the Vehicle Diagnostic Tester.
Removing
-- Turn off the ignition and all electrical consumers and remove the ignition key.
-- Open the left storage compartment in the luggage compartment.
The bracket with the Digital Sound System Control Module - J525- must be removed first.
-- Release and disconnect the connectors from the Digital Sound System Control Module - J525- - 2-.
-- Insert the Fiber-Optic Repair Set - Connector Protective Caps VAS6223/9 - 1- onto the MOST bus connector - 2-.
-- Remove the nuts and screws - arrows- on the bracket - 1- and remove the Digital Sound System Control Module - J525- - 2- with the bracket - 1-.
The Digital Sound System Control Module - J525- covers the nuts on the Digital Sound System Control Module 2 - J787-.
-- Remove the screws - arrows- and remove the Digital Sound System Control Module - J525- - 1- from the bracket - 2-.
-- Remove the nuts - arrows- on the bracket - 2- and remove the Digital Sound System Control Module 2 - J787- - 1- from the bracket - 2-.
Installing
-- Install in reverse order of removal.
Tightening Specifications