Window Guide, Removing And Installing: Installing

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2021 Audi S8, 2021 Audi A8 e Quattro, 2021 Audi A8 Quattro, 2020 Audi S8, and 2020 Audi A8 e Quattro. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

-- Install the window guide -A- on the door flange in the sequence -1 through 5-.

Fig 1: Installing Window Guide Door Flange In Sequence

Courtesy of AUDI OF AMERICA, LLC

Step
1.	-- Position the upper edge of the window guide on the B-pillar door flange and push it forward in the direction of travel.
	The guide pin -B- must engage in the window guide mount.
2.	-- Install the window guide on the door flange.
3.	-- Align the window guide on the A-pillar guide rail.
4.	-- Insert the seal -C- into the guide rail.
5.	-- Install the B-pillar trim (refer to B-PILLAR DOOR TRIM, REMOVING AND INSTALLING, FRONT ) and insert the seal -D- into the guide rail.