Glow Plug, Camshaft Position Sensor And Engine Speed Sensor Overview
WARNING: This page is about a different car, the 2014 Audi A8 Quattro. However, it is still accessible from the selected car via links, so may be relevant.
- Sensor Wheel
- For the engine speed sensor -G28-
- Removing and installing, refer to ENGINE SPEED SENSOR -G28-, REMOVING AND INSTALLING
- Glow Plug
Cylinder bank 1 (right):
- Glow Plug 1 -Q10-, Glow Plug 2 -Q11-, Glow Plug 3 -Q12-
- Combustion Chamber Pressure Sensor 2 -G678- may be installed in cylinder 2 depending on the exhaust gas standards.
Cylinder bank 2 (left):
- Glow Plug 4 -Q13-, Glow Plug 5 -Q14-, Glow Plug 6 -Q15-
- Removing and installing, refer to GLOW PLUGS .
- 12 Nm
- Connector
- Bolt
- 9 Nm
- Camshaft Position (CMP) Sensor -G40-
- Removing and installing, refer to CAMSHAFT POSITION (CMP) SENSOR -G40- .
- O-ring
- Replace
- Engine Speed (RPM) Sensor -G28-
- Removing and installing, refer to ENGINE SPEED (RPM) SENSOR -G28- .
- Bolt
- 9 Nm
1 - Glow plug with combustion chamber pressure sensor (installed only in cylinder 2)
2 - Glow plug without combustion chamber pressure sensor