REAR DISPLAY Multimedia Display Unit 1 -Y22- /Multimedia Display Unit 2 -Y23-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2015 Audi S8, 2015 Audi A8 Quattro, 2014 Audi S8, 2014 Audi A8 Quattro, and 2013 Audi S8. However, it is still accessible from the selected car via links, so may be relevant.
The display is attached to the front seat backrest by a retainer. It is not necessary to remove the retainer.
The display -1- is attached at the back with the cover -3-. Make sure the lower tabs -4- on the display -1- are pushed in first into the grooves -2-. Then install the other tabs -arrows-.
-- Carefully unclip the cover -2- on the display -1- using the Trim Removal Wedge3409 -arrows-.
Two screws -arrows- attach the display -1- to the bracket -4-.
-- Remove the bolts -2- and slide the display -1- upward slightly until the connectors lock into place.
-- Unlock and disconnect the connectors -2 and 3- on the back on the display -1-.
-- Remove the display completely from the bracket.