Rain/Light Recognition Sensor -G397-, REPLACING, VEHICLES THROUGH MY 2012: Installing

WARNING: This page does not describe the selected car, but rather 13 other vehicles, including the 2017 Audi SQ5, 2017 Audi Q5, 2016 Audi SQ5, 2016 Audi Q5, and 2015 Audi SQ5. However, it is still accessible from the selected car via links, so may be relevant.

Install in the reverse order of removal. Note the following:

NOTE:

Replace the silicon pad.

-- Press the grip surfaces -arrows- on the protective cap -2- gently together and remove from the sensor -1-.

Fig 1: Removing Protective Cap From Rain/Light Recognition Sensor

Courtesy of AUDI OF AMERICA, LLC

NOTE:

To avoid contaminating the silicone pad, remove the protective cap just before installing it.

-- Spray the entire surface of the silicone pad -1- with the Cleaning Solution D 009 401 04 and insert the sensor into the mount.

Fig 2: Spraying Entire Surface Of Sensor Foil With Cleaning Solution D 009 401 04 And Inserting Sensor In Mirror Base

Courtesy of AUDI OF AMERICA, LLC

CAUTION:

The Rain/Light Recognition Sensor -G397- must have no embedded objects or bubbles between it and the windshield to function correctly.

-- Press the retaining clip onto the mounting plate until it audibly engages.