Close Range Communication Control Module 2 -J1170-, REMOVING AND INSTALLING: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2021 Audi S8, 2021 Audi A8 e Quattro, 2021 Audi A8 Quattro, 2020 Audi S8, and 2020 Audi A8 e Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the center console insert. Refer to CENTER CONSOLE INSERT, REMOVING AND INSTALLING .
The Close Range Communication Control Module 2 -J1170- is clipped into the center console insert.
-- Remove the Close Range Communication Control Module 2 -J1170- -1- from the center console insert in the direction of -arrow-.
-- Release and disconnect the connectors -2 and 3-.