Windshield Washer Fluid Level Sensor, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2021 Audi S8, 2021 Audi A8 e Quattro, 2021 Audi A8 Quattro, 2020 Audi S8, and 2020 Audi A8 e Quattro. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the right front wheel.
-- Remove the right front wheel housing liner. Refer to OVERVIEW - FRONT WHEEL HOUSING LINER .
-- Place a drip tray under the washer fluid reservoir.
-- Disconnect the connector -1-.
-- Remove the windshield washer fluid level sensor -3- from the windshield washer fluid reservoir.