Night Vision System Control Module, Removing And Installing: Removing

-- Turn off the ignition and all electrical equipment and remove the ignition key.

-- Loosen the front left seat and with the wires still attached and push rearward. Refer to FRONT SEATS .

-- Remove the floor mat.

-- Remove the sill panel. .

-- Remove the footrest. .

-- Disengage the carpet and push aside.

-- Release the clips in the direction of -arrow-.

Courtesy of AUDI OF AMERICA, LLC

-- Open the cover -1-.

-- Push the retaining tab in the direction of -arrow- and remove the Night Vision System Control Module -J853- -3- from the E-box.

Courtesy of AUDI OF AMERICA, LLC

-- Release connectors -1 and 2- and remove from the Night Vision System Control Module -J853- -3-

• First release the connector -2- and then -1-.