LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2017 >> A6 Premium Plus >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System (Service Information - (Coolant Circuit) CAEB, CGXB, CEUC, CTUA, CEUC, CAED, CHJA, CPNB, CRDB, CPNB, CREC, CTGE, CYNB, CWUC, CREH, CWUB) >> Air Conditioning >> Display And Control Head >> Display And Control Head, Removing And Installing >> Climatronic Control Module -J255-, REMOVING AND INSTALLING >> Installing
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Climatronic Control Module -J255-, REMOVING AND INSTALLING: Installing

Installation is done is reverse order, observe the following: 

-- When replacing a Climatronic Control Module -J255- control head, pay attention to the exact allocation. Refer to the Parts information.

After replacing/installing the Climatronic Control Module -J255- control head, always perform the following procedures on the Vehicle Diagnostic Tester in the "Guided Fault Finding" function.

-- Perform and/or check the coding.

-- Perform the basic setting.

-- Read the Diagnostic Trouble Code (DTC) memory (and clear the input for the currently displayed entry).

-- Check the adaptation.

-- If necessary, perform the output diagnostic test.

scientia non olet · About LEMON Manuals