BASEPLATE FOR Distance Regulation Control Module -J428-, REMOVING AND INSTALLING, VERSION 2 THROUGH MY 2016: Installing

Install in the reverse order of removal. Note the following:

NOTE:

Replace the quick release.

The stud bolts in the adapter frame are pre-set. If necessary, correct the setting.

-- Place the control module on a soft and clean surface.

-- Measure the dimension -a- at all stud bolts using the :VAS6335 and correct if necessary.

Courtesy of AUDI OF AMERICA, LLC

-- Position the retaining plate -3- onto the distance regulation control module -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Carefully press the new quick release -4- onto the stud bolt -2-.

-- Turn the quick release clockwise onto the retaining plate to the stop -arrow-.