Distance Regulation Control Module -J428- ADAPTER FRAME, REPLACING, VERSION 2: Installing

Install in the reverse order of removal. Note the following:

-- Place the control module on a soft and clean surface.

-- Measure the dimension -a- at all stud bolts using the :VAS6335  and correct if necessary.

Courtesy of AUDI OF AMERICA, LLC

• Dimension -a- = 40.3 ± 0.5 mm

-- Position the retaining plate -3- onto the distance regulation control module -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Carefully press the new quick release -4- onto the stud bolt -2-.

-- Turn the quick release clockwise onto the retaining plate to the stop -arrow-.