Distance Regulation Control Module -J428- Adapter Frame, Replacing, Version 2 And RS3 From My 2017: Installing

Install in reverse order of removal and note the following:

NOTE:

Replace the quick release.

The stud bolts in the adapter frame are pre-set. If necessary, correct the setting.

-- Place the control module on a soft and clean surface.

Fig 1: Measuring Dimension --a-- With VAS6335

Courtesy of AUDI OF AMERICA, LLC

-- Measure the dimension -a- on the upper and lower stud bolt using a digital caliper and correct if necessary.

Different adjustment values dimension -a- for the upper and lower stud bolt.
Adjust the dimension -a- on the upper and lower stud bolt. Refer to Installing - Measure the dimension -a- at the upper stud bolt using the :VAS6335 and correct if necessary. .