Component Location Overview - Injection System

Accelerator Pedal Position Sensor G79 / Accelerator Pedal Position Sensor 2 G185 Component Location 

• In the accelerator pedal module.

2 -

Accelerator Pedal Module Connector

• The Accelerator Pedal Position Sensor -G79- and the Accelerator Pedal Position Sensor 2 -G185- are integrated in the accelerator pedal module and cannot be replaced separately.

Removing and Installing. Refer to OVERVIEW - ACCELERATOR PEDAL MECHANISM .

Brake Lamp Switch F / Brake Pedal Switch F63 Component Location 

• In the engine compartment on the brake booster.

1. Brake Lamp Switch -F- /Brake Pedal Switch -F63-

Removing and Installing. Refer to COMPONENT LOCATION OVERVIEW - ABS/ESP .

Clutch Position Sensor G476 Component Location 

• On the clutch pedal bracket -arrow-.

Removing and Installing. Refer to the appropriate Service Information .

Connectors (All Engine Codes except CRFA and CRFC) 

1. Wastegate Bypass Regulator Valve -N75-
2. Exhaust Gas Temperature Sensor 4 -G648-
3. Exhaust Gas Temperature Sensor 3 -G495-
4. Exhaust Gas Temperature Sensor 2 -G448- (installed depending on the emissions standard)
5. Heated Oxygen Sensor -G39-
6. Mass Airflow Sensor -G70-

Connectors (Only for Engine Codes CRFA and CRFC) 

1. Wastegate Bypass Regulator Valve -N75-
2. EGR Temperature Sensor -G98-
3. Mass Airflow Sensor -G70-

Connector (only engine codes CRFA, CRFC, CRUA, DEJA, DEJB, DGTE, DJGA and DFGA) 

Engine codes CRFA, and CRFC

1. Exhaust Gas Temperature Sensor 1 -G235-

Engine Codes CRUA, DEJA, DEJB, DGTE, DJGA and DFGA

1. EGR Temperature Sensor -G98-

EGR Cooler Switch-Over Valve N345 1 (Only Engine Codes CRFA and CRFC) 

Connector for Oxygen Sensor after Catalytic Converter G130 Component Location 

• Behind the left center underbody trim panel -arrow-.

Transmission Neutral Position Sensor G701 Component Location 

• Front left on the transmission.

1. Connector for Transmission Neutral Position Sensor -G701-
2. Connector for Back-Up Lamp Switch -F4-

Exhaust Door Control Unit J883 Component Location (not installed on engine codes CRFA and CRFC) 

• In the front exhaust pipe.

Visible flap movement -arrow-.

Removing and Installing. Refer to Exhaust Door Control Unit -J883-, REMOVING AND INSTALLING .

Cylinder Head Coolant Valve N489 Component Location 

Removing and Installing. Refer to Cylinder Head Coolant Valve -N489-, REMOVING AND INSTALLING .