Monitor-ID $3D: EVAP Valve Function Check
-- Connect the scan tool.
-- Start the engine and run at idle.
-- Select "Diagnostic Mode 06: Check / test the results of components that are not continuously monitored".
Select "Monitor-ID $3D".
-- Select the desired "Test-ID".
-- Check specified values at idle.
| Test-ID | DTC | Component or System | Min. | Max. | Additional Information |
|---|---|---|---|---|---|
| $8B | P0441 | Tank Vent Valve - Function Check, Test Using Cross-Correlation. | 0.1 | 655.35 | Refer to DTC P0441 in the DTC summary table. Engine Control Module --, 2016 MY - P0441 |
| $92 | P0441 | Tank Vent Valve - Function Check, Fast Inspection. | 0.399 | 1.999 | Refer to DTC P0441 in the DTC summary table. Engine Control Module --, 2016 MY - P0441 |
-- If any of the components or systems fail to meet the specified values, refer to Diagnostic "Mode 03: Interrogating Fault Memory" to check for stored DTC's or the corresponding diagnostic repair procedure DIAGNOSTIC MODE 03 - READ DTC MEMORY .
-- Switch the ignition off.