Steering Column Switch Module, Removing And Installing: Removing
-- Adjust steering wheel downward and to rear as far as possible, use entire adjustment range of steering column adjustment for this.
-- Remove The Driver Airbag. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING / OVERVIEW - DRIVER SIDE AIRBAG / OVERVIEW - STEERING WHEEL .
-- Remove the steering wheel. Refer to AIRBAG UNIT WITH IGNITER, REMOVING AND INSTALLING / OVERVIEW - DRIVER SIDE AIRBAG / OVERVIEW - STEERING WHEEL .
-- Remove The Steering Column Trim Panel. Refer to OVERVIEW - STEERING COLUMN TRIM PANEL / UPPER STEERING COLUMN TRIM PANEL, REMOVING AND INSTALLING / LOWER STEERING COLUMN TRIM PANEL, REMOVING AND INSTALLING .
-- Remove the bolt -1-.
-- Disconnect the connector -2-.
Before disconnecting the connector -3-, discharge any electrostatic charge from your body by touching an electrically grounded vehicle component such as the door striker pin.
-- Disconnect the connector -3-.
-- Press the catch -1- in the direction of the -arrow- until the connector -2- disengages.
-- Remove the steering column switch module carefully.