Perform Any Subsequent Work Using the Vehicle Diagnostic Tester.

Connect the Vehicle Diagnostic Tester and proceed with a vehicle-specific entry in Guided Fault Finding.
Wait until the Vehicle Diagnostic Tester has checked all the vehicle control module.
Press the GO TO button and select "function/component selection".
Select the program in Guided Function.
Now follow the instructions on the screen to perform the calibration.

Courtesy of AUDI OF AMERICA, LLC

NOTE: A step is performed in guided fault finding next to determine the body height.

Determine the body height -a- at all four wheels in the center of the wheel between the wheel contact surface and the lower edge of the fender.

Courtesy of AUDI OF AMERICA, LLC