Multimedia Display Unit 1/2 -Y22- / -Y23-, Removing And Installing: Removing

-- Turn off the ignition and all electrical equipment and remove the ignition key.

The display is attached to the front seat backrest by a retainer. It is not necessary to remove the retainer.

The display -1- is attached at the back with the cover -3-. Make sure the lower tabs -4- on the display -1- are pushed in first into the grooves -2-. Then install the other tabs -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Carefully unclip the cover -2- on the display -1- using the :3409  -arrows-.

Courtesy of AUDI OF AMERICA, LLC

Two screws -arrows- attach the display -1- to the holder -4-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2- and slide the display -1- upward slightly until the connectors lock into place.

Courtesy of AUDI OF AMERICA, LLC

-- Unlock and disconnect the connectors -2 and 3- on the back on the display -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the display upward completely from the holder.