Digital Sound System Control Module -J525-, REMOVING AND INSTALLING, BANG & OLUFSEN, FROM MY 2015: Removing
-- Turn off the ignition and all electrical equipment and remove the ignition key.
-- Remove the left luggage compartment side trim panel. Refer to LUGGAGE COMPARTMENT SIDE TRIM PANEL, REMOVING AND INSTALLING .
The bracket with the Digital Sound System Control Module -J525- must be removed first.
-- If equipped, remove the trailer hitch lever. Refer to OVERVIEW - TRAILER HITCH .
-- Remove the nuts -4, 6 and 7- and the screw -2- on the bracket -1-.
-- Remove the brace -3-.
-- Pivot the Digital Sound System Control Module -J525- -5- with the bracket -1- into the luggage compartment.
-- Release and disconnect the connectors from the Digital Sound System Control Module -J525- -5-.
-- If equipped, release and disconnect the connectors from the TV Tuner -R78-.
-- Insert the :VAS6223/9 -1- onto the MOST bus connector -2-.
-- Remove the Digital Sound System Control Module -J525- -5- with the bracket -1-.
It is not necessary to remove the TV Tuner -R78-.
-- Remove the bolts -arrows- and remove the Digital Sound System Control Module -J525- -1- from the bracket -2-.