Active Steering Safety Lock (Locking Magnet), Removing And Installing: Installing: Notes
Install in reverse order of removal. Note the following:
- After replacing the Active Steering Safety Lock Actuator -F437- (dynamic steering), update the software for the Active Steering Control Module -J792- by starting the corresponding program on the Vehicle Diagnostic Tester in Guided Functions .
- If a new Active Steering Safety Lock Actuator -F437- (dynamic steering) is installed, transfer the marking from the old one to the new one.
-- Install the new actuator as shown in the following table and secure it with both new bolts -1 and 2- (use the supplied tool).