LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> Audi >> 2017 >> S8 >> Repair and Diagnosis >> Transmission >> Transmission Control Systems >> Controls, Housing >> 37 Controls, Housing >> Selector Mechanism >> Parking Lock Emergency Release Cable, Removing And Installing >> Front Emergency Release Cable, Parking Lock, Removing And Installing >> Removing
September 30: LEMON manuals is back up on a temporary server! Slowness is possible

Front Emergency Release Cable, Parking Lock, Removing And Installing: Removing

WARNING:

The vehicle could start to roll and cause an accident.

  • Press the button on the electro-mechanical parking brake to activate it.

-- Remove the rear noise insulation -2-. Refer to Noise Insulation, Removing and Installing .

Fig 1: Identifying Front Noise Insulation
GWWA10-11078Courtesy of AUDI OF AMERICA, LLC

-- Release the retainers in direction of -arrows A- and slide the sleeve -1- in direction of -arrow B-.

Fig 2: Identifying Emergency Release Cable
GWWA37-10984Courtesy of AUDI OF AMERICA, LLC

-- Disconnect the rear emergency release cable from the front emergency release cable in direction of -arrow C-.

-- Remove the bolts -2 and 3- and remove the front emergency release lever on the selector lever -1- for the parking lock emergency release.

Fig 3: Identifying Selector Lever Bracket
GWWA37-10953Courtesy of AUDI OF AMERICA, LLC