8 Inch Display With Kinematics, Removing And Installing: Notes
Special Tools And Workshop Equipment Required
- Torque Screwdriver :VAG1624
The Front Information Display Control Head -J685- (Display) is located in the center of the instrument panel.
NOTE:
Only when the display is to be disconnected from the kinematics does the Front Information Display Control Head -J685- have to be brought into the service position before removal. Refer to 8-INCH FRONT DISPLAY SERVICE POSITION .
If only the display with kinematics should be removed and installed, then the service position for the Front Information Display Control Head -J685- is not necessary.
If the Front Information Display Control Head -J685- was brought into the service position, the Vehicle Diagnostic Tester must remain connected.