Coolant Pump Toothed Belt, Removing And Installing: Installing

WARNING: This page is about a different car, the 2020 Audi A3, 2019 Audi A3, and 2018 Audi A3. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

Note the toothed belt sprocket installation location -item ) OVERVIEW - COOLANT PUMP/COOLANT THERMOSTAT - List Item: Toothed Belt Sprocket.
Replace the bolts that were tightened with an additional turn after removing them.
Secure all hose connections with hose clamps that match the ones used in series production. Refer to the Parts Information.

-- Install the Oil Pressure Switch, Level 3 -F447-. Refer to Oil Pressure Switch, Level 3 -F447-, REMOVING AND INSTALLING .

-- Connect the coolant hoses with the connector coupling. Refer to OVERVIEW - RADIATOR/RADIATOR FAN .

-- Fill with coolant. Refer to COOLANT, DRAINING AND FILLING .

Additional procedures depending on the model. Refer to COOLANT PUMP TOOTHED BELT, REMOVING AND INSTALLING .