Windshield Projection Head Up Display Control Module, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2020 Audi SQ5, 2020 Audi Q5 e, 2020 Audi Q5, 2019 Audi SQ5, and 2019 Audi Q5. However, it is still accessible from the selected car via links, so may be relevant.
-- Remove the windshield. Refer to WINDSHIELD, REMOVING AND INSTALLING .
-- Remove the upper cover -2- from the instrument panel -1- using the : T10383/1 .
-- Cover the control module -3- with a soft towel.
CAUTION:
There is a risk of destroying the windshield projection head up display control module.
- Only remove the designated bolts from the control module.
- Never remove the bolts for the housing upper section.
-- Remove the bolts -1, 2, 4-.
-- Lift the control module slightly and disconnect the connector.
-- Remove the control module.