Overview - Ignition System

Fig 1: Ignition System Component Locations

Courtesy of VOLKSWAGEN GROUP OF AMERICA, INC.

Bolt
- 8 Nm + 90°
- Always replace after removing.
- The tightening specifications affect function of the knock sensor
Knock Sensor 1 -G61-
- Removing and installing. Refer to KNOCK SENSOR 1 -G61- , REMOVING AND INSTALLING .
Spark Plug
- 30 Nm
Spark Plug Connectors
Ignition Coil with Power Output Stage
- Ignition Coil 1 with Power Output Stage -N70-
- Ignition Coil 2 with Power Output Stage -N127-
- Ignition Coil 3 with Power Output Stage -N291-
- Ignition Coil 4 with Power Output Stage -N292-
- Removing and installing. Refer to IGNITION COILS WITH POWER OUTPUT STAGES, REMOVING AND INSTALLING .
Bolt
- 10 Nm
Nut
- 9 Nm
Bolt
- 9 Nm
Camshaft Position Sensor 3 -G300-
- Removing and installing. Refer to CAMSHAFT POSITION SENSOR 3 -G300- , REMOVING AND INSTALLING .
O-ring
- Always replace if damaged
O-ring
- Always replace if damaged
Camshaft Position Sensor -G40-
- Removing and installing. Refer to CAMSHAFT POSITION SENSOR -G40- , REMOVING AND INSTALLING .
Bolt
- 9 Nm
O-ring
- Always replace if damaged
Engine Speed Sensor -G28-
- Check the O-ring for damage
- Removing and installing. Refer to ENGINE SPEED SENSOR -G28- , REMOVING AND INSTALLING .
Bolt
- 4 Nm + 45°
- Always replace after removing.