Information Electronics Control Module 1 -J794-, Removing And Installing: Notes
Special Tools And Workshop Equipment Required
- Radio Removal Tool :T10057
- Fiber-Optic Repair Set - Connector Protective Caps :VAS6223/9 .
- Torque Screwdriver :VAG1624
NOTE:
If replacing the control module, select the "Replace control module" function for the corresponding control module on the Vehicle Diagnostic Tester.
The Information Electronics Control Module 1 -J794- is located in the glove compartment. The cover frame of the Information Electronics Control Module 1 -J794- is secured with the glove compartment. The glove compartment must be removed first.