Output Flange, Removing And Installing, 0FN: Notes
Special tools and workshop equipment required
- Holding Fixture:VW313
- Gearbox Support:T10108
- Three-Arm Puller (Kukko 45/2):VAS251205
- Puller - Crankshaft/Power Steering Seal:T20143
- Chain Tensioner Locking Tool:T40265
- Bearing Installer - Differential Bearing:40-21
- Seal Installer - Side Shaft:T40121
- Sealing Grease:G 052 128A1
- Refer to the appropriate service information for the correct locking fluid.
- M10 x 30 bolt (quantity: 2)
- M12 x 10 nut (quantity: 4)
Characteristics of the bevel box. Refer to BEVEL BOX IDENTIFICATION .