Control Module For Left And Right Front Object Detection Radar Sensor -J1088- / -J1089-, Removing And Installing: Removing

-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.

-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .

-- Release and disconnect the connector -1-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the bolts -2-.

-- Tilt the control module -3- with the shield in the direction of -arrow- and out of the retainer and remove.

-- Release the retainers on the shield -2- in direction of -arrows-.

Courtesy of AUDI OF AMERICA, LLC

-- Remove the shield -2- from the control module for front object detection radar sensor -1-.