Guidelines For Clean Working Conditions

Even Small Pieces of Debris Can Cause Faults. for This Reason Follow the Rules of Cleanliness When Working Even Small Pieces of Debris Can Cause Faults. for This Reason Follow the Rules of Cleanliness When Working:

• Thoroughly clean the areas around the connections/maintenance openings before loosening/opening.
• Immediately seal off any open lines and connections with clean plugs taken from the Engine Bung Set: VAS6122  , for example.
• Place removed parts on a clean surface and cover them with lint-free cloths.
• Carefully cover or seal opened components if repairs are not performed immediately.
• Only install clean parts: remove the replacement parts from their packaging just before installing them. Do not use any parts that have been kept out of packaging (for example, in a toolbox).
• Do not work with compressed air when the system is open.
• Protect any disconnected connectors from dirt and moisture, and only connect them when they are completely dry.