Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING, VERSION 2, MFK3: Installing
Install in reverse order of removal and note the following:
- The camera field of vision on the inside of the windshield must not be fogged up or dirty.
- The clips must be replaced each time the front camera is removed.
-- Clean the viewing window on the windshield with Cleaning Solution: D 009 401 04 .
-- The clips -2- must be replaced each time the front camera is removed. In order to do so, remove the clips in the direction of -arrow- from the mount -2-.
-- Insert the guide -2- of the front camera -3- into the right mount -1-.
-- Place the support -4- on the clips -6-.
-- Insert the supports -4- between the clips and the mounts -6-, then push the supports -5- downward until they click into place audibly.
- The supports -4- must rest against the mounts -6- -arrows-.
-- Calibrate the driver assistance systems front camera after installation. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .