Exhaust Gas Temperature Sensor, Removing And Installing, AWD Vehicles: Installing

Install in reverse order of removal and note the following:

• Protect the exhaust gas temperature sensor against knocks and impacts. A dropped exhaust gas temperature sensor may not be used again.

-- Bring the pre-particulate filter temperature sensor into its installation position:

Courtesy of AUDI OF AMERICA, LLC

• Angle -α- = maximum 15°.

-- Bring the angled post-particulate filter temperature sensor (on some versions) into its installation position:

Courtesy of AUDI OF AMERICA, LLC

• Angle -α- = maximum 15°.

There are additional procedures depending on the model. Refer to EXHAUST TEMPERATURE REGULATION COMPONENTS, REMOVING AND INSTALLING .