Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING, VERSION 2, MFK3: Installing
WARNING: This page is about a different car, the 2022 Audi Q3. However, it is still accessible from the selected car via links, so may be relevant.
Install in the reverse order of removal while noting the following:
- The camera field of vision on the inside of the windshield must not be fogged up or dirty.
- The clips must be replaced each time the front camera is removed.
-- Clean the viewing window on the windshield with Cleaning Solution: D 009 401 04 .
-- The clips -2- must be replaced each time the front camera is removed. In order to do so, remove the clips in the direction of -arrow- from the mount -1-.
-- Insert the guide -2- of the front camera -3- into the right mount -1-.
-- Place the support -4- on the clips -6-.
-- Insert the supports -4- between the clips and the mounts -6-, then push the supports -5- downward until they click into place audibly.
- The supports -4- must rest against the mounts -5- -arrows-.
-- Calibrate the driver assistance systems front camera after installation. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .