Windshield Projection Head Up Display Control Module -J898-, REMOVING AND INSTALLING: Installing

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 2022 Audi S5 Sportback, 2022 Audi RS 5 Sportback, 2022 Audi A5 Sportback, 2021 Audi S5 Sportback, and 2021 Audi RS 5 Sportback. However, it is still accessible from the selected car via links, so may be relevant.

Install in reverse order of removal and note the following:

CAUTION:

There is a risk of destroying the windshield projection head up display control module.

- A control module that has fallen down cannot be used again.

- When inserting the control module, never apply pressure on the housing upper section.

-- Insert the Windshield Projection Head Up Display Control Module -J898- and tighten the bolts.

-- Mount the windshield and secure it - do not bond it.

-- Turn on the ignition and check the Windshield Projection Head Up Display Control Module -J898- function.

A number must be visible on the windshield.

-- Calibrate the Windshield Projection Head Up Display Control Module -J898-. Refer to Windshield Projection Head Up Display Control Module -J898-, CALIBRATING .