Memory Address, Erasing

NOTE:

It is possible to erase the memory, e.g. if the customer has lost a remote unit. Proceed as follows.

-- Switch ignition on with key.

-- Mechanically lock vehicle at left front door, using second key.

-- On remote unit, press "Open" button 5 times in one-second intervals. A short horn signal will sound.

-- Then after 6 seconds, press "Open" button once to activate memory erasing process.

Memory is now erased, and the central locking system can no longer be operated by the remote unit.

-- Switch ignition off.

As many as 4 new remote units can now be coded. Refer to MEMORY ADDRESS, CODING .