October 30: LEMON manuals on a temporary server, it is slow and having issues, download the manuals you need! Later in November we will switch back to the fast server.
Control Module and Hydraulic Unit
 Courtesy of AUDI OF AMERICA, LLC
|
- Rubber Bushing
- Bracket
- Bolt
- Step 1: 1 to 1.5 Nm (to position the seal)
- Step 2: 2.5 Nm
- Tighten in two steps alternating from side to side.
- Replace the bolts after removing
- ABS Control Module -J104-
- If the ABS Control Module -J104- is faulty, it can be replaced separately.
- If the ABS Hydraulic Unit -N55- is faulty, it must be replaced together with the ABS Control Module -J104-.
- ABS Hydraulic Unit -N55-
- If the ABS Control Module -J104- is faulty, it can be replaced separately.
- If the ABS Hydraulic Unit -N55- is faulty, it must be replaced together with the ABS Control Module -J104-.
- Brake Line
- 14 Nm
- 5.25 mm diameter and union bolt with M12x1 thread
- To the brake caliper
- Brake Line
- 16 Nm
- From brake master cylinder to the hydraulic unit
- 6 mm diameter and union bolt with M12x1 thread
- Bolt