Night Vision System Control Module -J853-, REMOVING AND INSTALLING, FROM 11/7/2016: Removing
WARNING: This page is about a different car, the 2022 Audi SQ7 and 2022 Audi Q7. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the left front seat. Refer to FRONT SEAT, REMOVING AND INSTALLING .
-- Lift the carpet and push aside.
-- Remove the bolts -arrows-.
-- Release and disconnect the connectors -3-.
-- Q7 e-tron: detach the wire clip from the tab.
-- Disengage the Night Vision System Control Module -J853- -1- with the bracket -2- in the direction of the -arrow A- and remove it.
-- Remove the bolts -3-.
-- Remove the Night Vision System Control Module -J853- -1- from the bracket -2-.