ABS Control Module -J104- AND ABS Hydraulic Unit -N55-, REMOVING AND INSTALLING, VEHICLES WITH A TDI ENGINE: Notes
NOTE:
If the ABS Control Module -J104- is faulty, the control module can be replaced separately.
If the ABS Hydraulic Pump -V64- faulty the ABS Hydraulic Unit -N55- must be replaced together with the ABS Control Module -J104-.
The ABS Hydraulic Pump -V64- cannot be replaced separately.
CONTROL MODULE, SEPARATING FROM HYDRAULIC UNIT
NOTE:
OVERVIEW - CONTROL MODULE AND HYDRAULIC UNIT .
If the ABS Control Module -J104- /ABS Hydraulic Unit -N55- is being replaced, select the "Replace" function for the ABS Control Module -J104- /ABS Hydraulic Unit -N55- on the Vehicle Diagnostic Tester, Guided Functions .
Special tools and workshop equipment required
- Vehicle Diagnostic Tester
- Torque Wrench 1331 5-50Nm: VAG1331
- Brake Pedal Actuator: VAG1869/2 .
- Bleeder bottle from the Brake Charger/Bleeder Unit: VAS5234
- Plugs from the Assembly Part Set: 5Q0 698 311
- M10 Plugs
- M12 Plugs