Control Module For Left And Right Front Object Detection Radar Sensor -J1088- / -J1089-, Removing And Installing: Removing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi SQ8, 2022 Audi RS Q8, 2022 Audi Q8, 2021 Audi SQ8, and 2021 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.
-- Turn off the ignition and all electrical equipment. Set the ignition key outside of the vehicle.
-- Remove the front bumper cover. Refer to BUMPER COVER, REMOVING AND INSTALLING .
-- Release and disconnect the connector -1-.
-- Remove the bolts -2-.
-- Tilt the control module -3- with the shield in the direction of -arrow- and out of the retainer and remove.
-- Release the retainers on the shield -2- in direction of -arrows-.
-- Remove the shield -2- from the control module for front object detection radar sensor -1-.