Driver Assistance Systems Front Camera -R242-, REMOVING AND INSTALLING: Installing
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi SQ8, 2022 Audi RS Q8, 2022 Audi Q8, 2021 Audi SQ8, and 2021 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal and note the following:
- The camera field of vision on the inside of the windshield must not be fogged up or dirty.
-- Clean the viewing window on the windshield with Cleaning Solution: D 009 401 04 .
-- The clip -1- must be replaced each time the Driver Assistance Systems Front Camera -R242- is removed. Remove the clip in the direction of -arrow- from the mount -2- to do so.
-- Insert the guide -3- for the Driver Assistance Systems Front Camera -R242- -1- into the mount -2- on the right side.
-- Place the support -4- on the clamp -5-.
-- Insert the support between the clip and the mount, and then push the support downward until it clicks into place.
- The support -4- must rest against the mount -6- -arrow-.
-- Calibrate the Driver Assistance Systems Front Camera -R242-. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .
- Conditions when the Driver Assistance Systems Front Camera -R242- must be calibrated. Refer to DRIVER ASSISTANCE SYSTEMS FRONT CAMERA, CALIBRATING .