Overview - Control Module For Adaptive Cruise Control
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi SQ8, 2022 Audi RS Q8, 2022 Audi Q8, 2021 Audi SQ8, and 2021 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Cover
- With Heating Element for Adaptive Cruise Control Radar Sensor - Z185-
- Removing and Installing. Refer to Heating Element for Adaptive Cruise Control Radar Sensor - Z185-, REMOVING AND INSTALLING .
- Control Module for Adaptive Cruise Control -J428-
- Removing and Installing. Refer to Control Module for Adaptive Cruise Control -J428-, REMOVING AND INSTALLING .
- Adjusting. Refer to RADAR SENSOR (Control Module for Adaptive Cruise Control -J428-), ADJUSTING .
- Cover
- Retaining Plate
- Removing and Installing. Refer to RETAINING PLATE FOR Control Module for Adaptive Cruise Control -J428-, REMOVING AND INSTALLING .
- Bolt
- 4 Nm
- Quantity: 4
- Clip
- Must be replaced when the stud bolt is removed
- Replacing. Refer to CLIP ON Control Module for Adaptive Cruise Control -J428-, REPLACING .
- Quantity: 3
- Stud Bolt
- Quantity: 3
- Note the adjustment dimension. Refer to Installing - Measure the dimension -a- at all stud bolts using the : VAS6335 and correct if necessary. .
- Clip
- Quantity: 2
- Open version
- Cannot be removed without being damaged
- Clip
- Closed version
- Cannot be removed without being damaged
- Note the installation position