Overview - Driver Assistance Systems Control Module
WARNING: This page does not describe the selected car, but rather 10 other vehicles, including the 2022 Audi SQ8, 2022 Audi RS Q8, 2022 Audi Q8, 2021 Audi SQ8, and 2021 Audi RS Q8. However, it is still accessible from the selected car via links, so may be relevant.
- Bracket
- For the Driver Assistance Systems Control Module -J1121-
- There are different versions. Refer to the Parts Information.
- Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
- Bolt
- 8 Nm
- Quantity: 2
- Impact Guard
- Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
- Bolt
- 8 Nm
- Control module "Low" : quantity: 2
- Control module "High" : quantity: 3
- 8 Nm
- Clip
- Attaching the impact guard to bracket
- Bolt
- 4.5 Nm
- For impact guard
- Quantity: 3
- Bolt
- 8 Nm
- Only on control module "Low"
- Bolt
- 8 Nm
- Only on control module "High"
- Bolt
- 4.5 Nm
- For bracket
- Quantity: 3
- Driver Assistance Systems Control Module -J1121-
- There are different versions. Refer to the Parts Information.
- Removing and Installing. Refer to Driver Assistance Systems Control Module -J1121-, REMOVING AND INSTALLING .
- Connector
- Connectors
- Allocation. Refer to the appropriate Wiring Diagram.