LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 1995 >> 318is Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Idle Speed Control Actuator >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

Locate idle speed control actuator at rear of intake manifold, just below last runner. Disconnect idle speed control actuator connector. Remove 2 nuts, pull out valve and at the same time disconnect hoses. To install, reverse removal procedure. Ensure new idle speed control actuator clicks with ignition on.

scientia non olet · About LEMON Manuals