LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 1995 >> 318is Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Remove/Install/Overhaul >> Fuel System >> Oxygen Sensor >> Removal & Installation
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation

Locate oxygen sensor connector below battery console and remove from clip holder. Pull off cover and remove oxygen sensor. To install, reverse removal procedure. Coat threads with anti-seize compound and install. Tighten oxygen sensor to 41 ft. lbs. (55 N.m).

scientia non olet · About LEMON Manuals