LEMON Manuals: Even more car manuals for everyone: 1960-2025
Home >> BMW >> 1999 >> 328is Automatic >> Repair and Diagnosis (Single Page) >> Engine Performance >> Remove, Overhaul & Install >> Engine Controls - Removal, Overhaul & Installation - 1 Of 2 >> Ignition System >> Powertrain Control Module (Pcm) >> Removal & Installation (5-Series & 7-Series)
April 5, 2026: LEMON Manuals is launched! Read the announcement.

Removal & Installation (5-Series & 7-Series)

PCM is located in box in right rear corner of engine compartment. Open locking bracket on PCM box. Open filter housing cover. Unhook filter housing from hinges. Unhook retaining clip and pull filter housing upward. Remove filter housing. Remove 4 PCM cover bolts. Disconnect PCM electrical connector. Remove PCM. To install, reverse removal procedure.