New Programming And Coding System: ISTA/P (09 05 01)

Publication date: 2009-03-03
Reference number: 09 05 01

NEW PROGRAMMING AND CODING SYSTEM: ISTA/P

TECHNICAL SERVICE BULLETIN

Reference Number(s): SI B 09 05 01, Date of Issue: March 3, 2009

BMW:	All
GROUP:	Programming/Coding Explanations

Superceded Bulletin(s): SI B09 05 01, Date of Issue: May 2009

NOTE: This Service Information bulletin supersedes SI B09 05 01 dated May 2008 .

SUBJECT

New Programming and Coding System: ISTA/P

SITUATION

The Integrated Service Technical Application/Programming (ISTA/P) is the new application for:

Programming
Coding
Car and Key Memory
Conversions
Retrofits

ISTA/P runs on the Integrated Software Service Station (ISSS).

Installation and update of ISTA/P can only be performed via the ISIS server.

PROCEDURE

Any documentation about ISTA/P can be found on BMW CenterNet - Aftersales Portal - Service - Workshop Technology - Vehicle Programming.

The following procedures no longer apply to ISTA/P. A description of the equivalent ISTA/P procedures may be found in the CenterNet documentation described above:

General Rules for Programming
Procedure A Module Replacement
Procedure B Software Update
Procedure C Troubleshooting
Procedure E Coding